Homemade woodworking tools

Woodworking hand tools

Simple Low Cost Desk/Table

This is a modified version of the desk from the Ana White website. Keeping with my upcycled theme, this project was built from the top of an old desk. If you prefer, the top can be made from 2x12s. I’ve also included a quick video of the build along with a PDF version of the plans.

PC table design

5 Power drill tricks for your DIY projects

Laptop table (wheely desk) plans

These are the plans for my Laptop table Horizontal parts of the legs:

Height adjustable laptop table (wheely desk)

This is a copy of the article I wrote for the March 2007 issue of Woodcraft MagazineI had originally written a Shorter article for my website. This article is on a refined version of the design that I built while writing the article for woodcraft magazine. This table design is intended to allow for working in unusual seating positions. I originally came up with this concept when I wanted to work from remotely from my girlfriend's place in another city. I wanted a table that I could be set up to be ergonomic with any seating opportunity I could find. I also wanted to be able to wheel the table out of the way and into a spare room while not in use.

Biscuit joinery without a biscuit joiner

Cutting biscuit slots

Cut slots for biscuits with a slot cutter mounted on an arbor that's equipped with a bearing. Cut a continuous slot on boards thicker than 3/4 in.

If you want to make biscuit joints, you don't have to buy a biscuit joiner. In most cases, a router equipped with a 5/32-in. slot bit can cut perfect slots to fit the biscuits. Mark the biscuit positions on both adjoining boards as you would with a biscuit joiner. Then cut a slot that's about 1/2 in. longer than the biscuit. On thick boards, you don't even have to mark out anything; just cut one quick, continuous slot on each board. Add glue and biscuits and then clamp it to create a strong joint.
There are two situations where a router can't substitute for a biscuit joiner: A router can cut slots only along the edges of a board, not across its face; and it can only cut along square edges, not beveled ones. Most slot cutters cut slots about 1/2 in. deep, which suits No. 20 biscuits. If you want to use smaller biscuits, buy a kit that includes three bearing sizes for No. 0, No. 10 and No. 20 biscuits (available online and at woodworking stores).

source: http://www.familyhandyman.com/tools/routers/advanced-router-techniques/view-all

Reclaimed Wood Furniture Seattle

How to Make Stained Kitchen Cabinets Look Shiny Again : Restoring & Painting Kitchen Cabinets

Making small hand plane

DIY Thickness Sander

Wooden Tool Man's DIY Drum Sander 2 Making the Drum